The fields you can set are:
VID Enter a VLAN ID from 1 to 4094 and hit <Enter>. This is the VLAN that will be defined on this screen.
VLAN Name Description of the VLAN.
Tag/Untag Toggle between T for tag and U for untag for each port.
Egress/Forbidden/Non-member (–)
number and press <space bar> to select E for Egress membership, or leave the dash "– ". An E designates the specified
port as a static member of the VLAN. A dash means the port is not given VLAN membership for the VID entered
above.
Choose Browse existing 802.1Q VLANs at the bottom of the 802.1Q Static VLAN Settings screen to access the
following screen:
78
Figure 6-40. 802.1Q Static VLAN Settings screen
Position the cursor over the dash "–" representing the appropriate port
Stackable NWay Ethernet Switch User's Guide
Using the Console Interface