Stackable NWay Ethernet Switch User's Guide
The fields you can set are:
VLAN ID (VID) Enter a VLAN ID from 1 to 24 and hit <Enter>. This is the VLAN that will be defined on this
screen. VID 1 is the default VLAN. All ports are designated members of VID 1 when VLANs are enabled. When a port
is assigned to another VLAN, it is removed from VLAN 1. If it is ever removed from the other VLAN, it will
automatically return to being a member of VLAN 1. Thus, all unassigned ports are automatically members of VLAN 1.
VLAN Name Description of the VLAN.
Port Assignments To change port VLAN assignments, you must first enter a VLAN ID number in the VLAN ID
field and press <Enter>. Next, position the cursor over the dash "–" representing the appropriate port number and press
<space bar> to select V for member. Pressing <space bar> again returns the V back into a '–'. A dash (–) means the port
is not given VLAN membership for the VID entered above. An 'X' shows that the port belongs to a different VLAN.
Pressing CLEAR erases all settings for the designated VLAN (VID).
After designating ports as members of the VLAN, press APPLY to let the changes take effect.
Choose Browse Port-based VLANs from the screen above to view the current Port-based VLAN settings.
Using the Console Interface
Figure 6-34. Port-based VLAN Configuration screen
73