Stackable NWay Ethernet Switch User's Guide
Figure 6-32. Add/Remove MAC-based Broadcast Domain Members screen
The fields you can set are:
Action Select the desired action by toggling between Add and Remove.
MAC Address The MAC address of the broadcast domain member being added or removed.
Please note that the Status field for the MAC address you have entered may read Not-Apply. Once the Switch is restarted
in MAC-based broadcast domain mode, the MAC-addresses will be applied, meaning that the broadcast domain is active.
Current Broadcast Domain, Number of members, MAC Address (in the lower part of the screen), and Status reflect the
current conditions. They are read-only fields and cannot be changed.
Configure Port-based VLANs
Choose Configure Port-based VLANs on the VLAN Configuration screen (System Configuration à
Configure VLANs & MAC-based Broadcast Domains) to access the Port-based VLAN Configuration
menu pictured below (note that if you have just changed to this mode, you must also reboot the Switch before being able to
work with port-based VLANs):
Using the Console Interface
71