Unpacking And Setup; Unpacking; Setup; Desktop Or Shelf Installation - D-Link DES-3624i User Manual

This chapter provides unpacking and setup information for the Switch.

Unpacking

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items:
One Stackable NWay Ethernet Switch
Mounting kit: two mounting brackets and screws
Four rubber feet with adhesive backing
One AC power cord
One RS-232 cable (master only)
This user's guide on CD-ROM with a Registration Card
If any item is found missing or damaged, please contact your local D-Link reseller for replacement.

Setup

The setup of the Switch can be performed using the following steps:
The surface must support at least 5 kg.
The power outlet should be within 1.82 meters (6 feet) of the device.
Visually inspect the power cord and see that it is secured fully to the AC power connector.
Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place
heavy objects on the Switch.

Desktop or Shelf Installation

When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach
these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the
objects around it.
14
2 U
NPACKING AND
Stackable NWay Ethernet Switch User's Guide

Unpacking and Setup

2 2
S
ETUP