Stackable NWay Ethernet Switch User's Guide
Figure 7-33. 802.1Q Static VLANs --- Edit window
To configure an 802.1Q VLAN entry, enter a VLAN ID number and VLAN Name in the first two fields. Next, select the
desired Switch. Finally, check Tag for each member port you wish to be a tagging port. None should be checked if you don't
want a port to belong to a VLAN. Check Egress to statically set a port to belong to a VLAN. Checking Forbidden prevents
the port from joining a VLAN dynamically as well as defining the port as a non-member. Click Apply to let the changes
take effect.
GMRP
This section features three parts: GMRP Settings, Port GMRP Settings, and Static Multicast Forwarding.
See below for further detail.
136
Web-Based Network Management