Alto-Shaam ASF-60G Installation, Operation And Maintenance Manual page 7

D A N G E R
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH,
OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
C A U T I O N
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN
IN OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
S I T E I N S T A L L A T I O N
NOTE:
To avoid equipment damage, remove the
Mobile Oil Trolley before moving this
appliance with a forklift or pallet lift.
MINIMUM CLEARANCE REQUIREMENTS
combustible
surfaces
right side
left side
6" (152mm)
back
front
: 6 " (152mm) minimum between the element swing in
plus
the extended position and the lower edge of the exhaust
hood and filter media.
entry clearance
Ne pas installer à une distance inférirure à celle
indiquée ce-dessous d'une parol en matiére
combustible: Côtés 6 pouches, Arriére 6 pouches.
W A R N I N G
MINIMUM CLEARANCES MUST
REMAIN UNOBSTRUCTED.
DO NOT place insulation or
any other type of materials
in clearance areas.
-
non combustible
surfaces
0" (0mm) 0"
0" (0mm) 0"
6" (152mm)
25" (635mm)
: 30" (762mm)
uncrated
Gas Fry er Opera ti o n & Care Manu al • 5
DO NOT USE FORKLIFT FROM
USE FORKLIFT FROM SIDE ONLY.
(0mm)
(0mm)
I N S T A L L A T I O N
D A N G E R
AVERTISSEMENT : UNE INSTALLATION,
UN AJUSTEMENT, UNE ALTÉRATION,
UN SERVICE OU UN ENTRETIEN NON
CONFORME AUX NORMES PEUT CAUSER
DES DOMMAGES À LA PROPRIÉTÉ, DES
BLESSURES OU LA MORT.
LIRE ATTENTIVEMENT LES DIRECTIVES
D'OPÉRATION ET D'ENTRETIEN
AVANT DE FAIRE L'INSTALLATION, OU
L'ENTRETIEN DE CET ÉQUIPEMENT.
C A U T I O N
FRONT OR REAR OF UNIT.