Alto-Shaam ASF-60G Installation, Operation And Maintenance Manual page 32

B A S I C C O N T R O L O P E R A T I O N
PROGRA MM I NG T HE C ON T R O L
5. Choose the correct melt cycle for your frying compound. The melt cycle will appear in the L ED as
L" or " C S" . "C
"C
compounds such as shortening. Do not choose "C
• Scroll to change melt cycles by pressing
• Press TWICE to accept the new setting and proceed to the lock.
NOTE:
Do not press just once and change the " g A S" or "EL EC" setting.
Lock or unlock the Control Programming. " L o C" or "U LoC" will appear in the LED display.
6.
" L oC " will prohibit unqualified personnel (without the password) from entering Control
Programming. " UL o C" will leave Control Programming unlocked.
• Scroll to change lock condition by pressing
• Press to accept the new setting and proceed to select °F or °C.
7. Select °F or °C for the temperature display. "F " or "C " will appear in the LE D display. "F"
will cause the L ED to display Fahrenheit. " C" will cause the LE D to display Celsius.
• Scroll to change from °F to °C by pressing
• P ress to accept the new setting and proceed to restart Control Programming sequence or
press and hold for one second to exit Control Programming.
NOTE:
At any point in the sequence, pressing and holding
Programming.
C A U T I O N
THIS SECTION IS PROVIDED FOR THE ASSISTANCE
OF QUALIFIED SERVICE TECHNICIANS ONLY AND
IS NOT INTENDED FOR USE BY UNTRAINED OR
UNAUTHORIZED SERVICE PERSONNEL.
L " is for liquid frying compounds such as oil and "C
Gas F ryer Operati on & Care Manual • 30
0".
or .
or .
or .
for one second will exit Control
S" is for solid frying