Alto-Shaam ASF-60G Installation, Operation And Maintenance Manual page 30

B A S I C C O N T R O L O P E R A T I O N
CO N T ROL PRO G R A M MI NG O VE RVI E W
NOTE:
Because each fryer station is controlled separately, the following procedures must be followed for
every component fryer in multiple-station units.
Control Programming allows you to:
• Set the left and right timers
• Choose the set-point temperature
• Choose the correct melt cycle for our frying compound
• Lock the Control Programming
• Select °F or °C for the temperature display
Press the "PROGRAM" button
C A U T I O N
THIS SECTION IS PROVIDED FOR THE ASSISTANCE
OF QUALIFIED SERVICE TECHNICIANS ONLY AND
IS NOT INTENDED FOR USE BY UNTRAINED OR
UNAUTHORIZED SERVICE PERSONNEL.
Press the LEFT BASKET or RIGHT BASKET button to scroll
OR
through the choices for each function.
Pressing the P R OG RA M button confirms the change
and moves on to the next function.
Pressing and holding the PRO GRA M button for one
+ HOLD
second exits Control Programming.
Gas F ryer Operati on & Care Manual • 28
to enter Control Programming.