System Settings; Controlling The Printing Of The Startup Page - Xerox C2424 - WorkCentre Color Solid Ink User Manual

System Settings

This section includes:
■ "Controlling the Printing of the Startup Page" on page 1-14
"Changing the Power Saver Timeout" on page 1-15
■
■ "Changing Intelligent Ready Mode" on page 1-16
■ "Locking the Control Panel Menus" on page 1-17
"Changing the Load Paper Timeout" on page 1-18
■
■ "Adjusting Control Panel Brightness" on page 1-19
■ "Adjusting Control Panel Contrast" on page 1-19
■ "Setting the Control Panel Language" on page 1-19
■ "Setting the System Date and Time" on page 1-20
Note
You can print the Menu Map to see the path through the menus to make other selections;
see "Menu Map" on page 1-10. You can also press the Help (?) button at any time to get
more information about menu selections.

Controlling the Printing of the Startup Page

The system automatically produces a "Startup Page" each time the system is turned on or
reset. You can turn off the automatic printing of the "Startup Page" and later print it from the
information pages menu.
To turn on/off the "Startup Page", use either:
■ The control panel
■ CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the "Startup Page":
1.
On the control panel, press the System Setup button.
2. General
In the menu, select
3. System Controls, then press the Enter button.
Select
4. Startup Page, then press the Enter button.
Select
5. On or Off, then press the Enter button.
Select
Setup, then press the Enter button.
WorkCentre® C2424 Copier-Printer
1-14
System Settings