Managing Copy Functions; Setting Whether A Copy Job Interrupts A Print Job - Xerox C2424 - WorkCentre Color Solid Ink User Manual

Managing Copy Functions

This section includes:
■ "Setting Whether a Copy Job Interrupts a Print Job" on page 3-18
"Using a Color Copy Password" on page 3-19
■

Setting Whether a Copy Job Interrupts a Print Job

Normally, the system interrupts print jobs when users make copies. Printing continues while
the system scans the originals. When the copies are ready to print, the print job pauses, the
copies print, then the print job resumes.
Set the print interrupt option at the control panel.
1. On the control panel, press the System Setup button.
2. In the menu, select General
3. Select System Controls, then press the Enter button.
4. Select Print Job Interrupt, then press the Enter button.
5. Select one of the following, then press the Enter button:
On – Interrupts print jobs when you make copies. (Factory default value)
■
Off
■ – Allows print jobs to finish before printing copies.
For more information about system controls, see the
Setup, then press the Enter button.
Features
WorkCentre® C2424 Copier-Printer
3-18

Managing Copy Functions

chapter of this guide.