Xerox C2424 - WorkCentre Color Solid Ink User Manual page 133

8. In the printer driver, select the appropriate tray as the paper source.
Note
Do not select Proof Prints during the print job. It will disturb the sequence of the pre-
collated sets.
9. To ensure the carbonless paper sets are properly loaded in the tray:
a.
Print one complete set.
b. Remove the printed set from the output tray.
c. Mark the top, white sheet of the printed set with a pen or a pencil.
■ If the paper is loaded correctly, the mark should appear on the printed side of the
subsequent colored sheets within a few seconds.
■ If a mark does not appear, repeat Steps 1–9 to make sure the paper is loaded correctly.
WorkCentre® C2424 Copier-Printer
5-48
Specialty Paper