Xerox C2424 - WorkCentre Color Solid Ink User Manual page 58

3. To have the image repeated in several rows:
a. Select Rows, then press the Enter button.
b.
Press the Up Arrow or Down Arrow button to scroll to a number from
press the Enter button.
4.
To have the image repeated in several columns:
a. Select Columns, then press the Enter button.
b. Press the Up Arrow or Down Arrow button to scroll to a number from
press the Enter button.
The factory default is Off;
Centering the Image
You can automatically center the copy image on the page, or within each area of a page that
has multiple copy images (N-Up). To do this:
1.
On the control panel, press the Copy button.
2. Auto
In the menu, select
3. On (to automatically center the image) or Off, then press the Enter button.
Select either
The factory default is Off.
Shifting the Image
In some cases, you may want to make copies on letterhead, colored paper, or transparencies.
After loading the special paper in the tray, select that tray for use for your copies. To do this:
1. On the control panel, press the Copy button.
2. In the menu, select Margin
3. To increase the margin on the long edge of the copy:
a. Select Long Edge, then press the Enter button.
b. Press the Up Arrow or Down Arrow button to scroll to a number from
2.0 inches (in 0.1 inch increments) or from
then press the Enter button.
4. To increase the margin on the short edge of the copy:
a. Select Short Edge, then press the Enter button.
b.
Press the Up Arrow or Down Arrow button to scroll to a number from
2.0 inches (in 0.1 inch increments) or from
then press the Enter button.
When you select margin shift, the right side of the control panel display has a page icon with
arrows showing the direction that the image shifts.
The factory default is Off; (long edge margin of
(1 row and 1 column).
Center, then press the Enter button.
Shift, then press the Enter button.
0 and short edge margin of 0).
WorkCentre® C2424 Copier-Printer
3-13
Adjusting Copying Options
0 through 50 mm (in 1 mm increments),
0 through 50 mm (in 1 mm increments),
1 to 10, then
1 to 10, then
0 through
0
through