Xerox C2424 - WorkCentre Color Solid Ink User Manual page 40

4. Verify that the paper is pushed against the roller until it stops and verify that the side
guides are pressed against the paper.
5. When prompted at the control panel:
If the paper size and type are correct, press the Enter button.
■
If the paper size and type are not correct, select Change, press the Enter button,
■
select the paper size, press the Enter button, select the paper type, then press the
Enter button.
■ If you are using custom size paper, see the
instructions on entering the
Note
If the control panel does not show the paper size that you loaded, slide the paper
guides to fit against the paper, then repeat Step 5.
Printing
Custom Width
WorkCentre® C2424 Copier-Printer
2-11
Loading Media in Tray 1
2424-041
chapter of this guide for
Custom Height
and the of the paper.