Disable Switching Of Display Order - Sharp MX-2300N System Settings Manual

Must Input Next Address Key at
Broadcast Setting
This setting is used to require that the [Next Address]
key be touched before the next address is entered when
performing a broadcast transmission.
When this setting is enabled, the [Next Address] key
cannot be omitted even if the next address is entered
with a one-touch key.
If a user attempts to enter the next address without
touching the [Next Address] key, a double-beep alarm
will sound and the entry will be rejected.
To enable this setting, select the checkbox
touch the [OK] key.
Scan Complete Sound Setting
The scan complete sound can be selected.
System Settings
Scan Complete Sound Setting
Scan Complete Sound
Volume: Volume:
Small Middle
Select one of the keys and touch the [OK] key.
The Number of File
Name/Subject/Body Keys
Displayed Setting
This setting is used to select the number of file name /
subject keys that are displayed in the screen. The
number of keys can be set to 3 or 6.
Select one of the keys and touch the [OK] key.
The Number of Direct Address
Keys Displayed Setting
This setting is used to select the number of one-touch
keys that are displayed in the Address Book screen. The
number of keys can be set to 6 or 9.
Select one of the keys and touch the [OK] key.
and
OK
Volume: No Sound
Big

Disable Switching of Display Order

This is used to prohibit changes to the order of display
(order search number, ascending, descending) in the
Address Book.
When this setting is enabled, touching a tab in the
Address Book screen does not change the order. The
currently selected display order will be the order that is
used after the setting is selected.
To enable this setting, select the checkbox
touch the [OK] key.
Hold Setting for Received Data
Print
This function holds received faxes and Internet faxes in
memory without printing them. The faxes can be printed
by entering a password (factory default setting: 0000)
with the numeric keys.
System Settings
Hold Setting for Received Data Print
Received Data Hold
Password Setting
Input a new password and press [OK].
To enable this setting, select the [Received Data Hold]
checkbox , enter a password with the numeric keys
when you wish to change the password, and touch the
[OK] key.
106
0000
and
OK