The Number Of User Name Displayed Setting - Sharp MX-2300N System Settings Manual

• When the single user is selected
Touch the counts that you wish to reset and touch the
[Reset Selected] key. To reset all counts, touch the
[Reset All] key with no counts selected.
User Count Reset
User Name :AAA AAA
Reset Selected
B/W
Copies
24,681,000
(Page Limit)
(--,---,---)
Prints
14,736,932
(Page Limit)
(--,---,---)
Prints(Doc.Filing)
11,223,421
(Page Limit)
(--,---,---)
• When multiple users are selected
Select the checkboxes
reset and touch the [Reset Selected] key. To reset all
counts, touch the [Reset All] key with no counts
selected.
User Count Reset
All Users
Reset All
B/W
Copies
Prints
Prints(Doc.Filing)
The display of the [Reset Selected] and [Reset All]
keys will vary depending on whether or not counts are
selected.
User Information Print
The following lists can be printed.
• All User Information Print
• User List
• List of Number of Pages Used
• Page Limit Group List*
• Authority Group List
• Favourite Operation Group List*
Touch the key of the desired list to begin printing.
* Cannot be printed when no groups are stored.
The Number of User Name
Displayed Setting
The number of users that are displayed in the user
selection screen can be selected (6, 8, or 12 users).
Select one of the keys and touch the [OK] key.
This setting also applies to the user selection screen
of document filing and the sender selection screen.
OK
001/ 200
F. Colour 2 Colour S. Colour
36,914,712 10,032,101 3,279,420
(37,000,000)(37,000,000)(37,000,000)
00,000,000
(00,000,000)
62,569,875 787,070
(--,---,---)(--,---,---)
of counts that you wish to
OK
F. Colour
2 Colour S. Colour
A Warning when Login Fails
This setting is used to display a warning and prohibit
login for five minutes if login fails three times in a row.
This prevents an unauthorised person from attempting to
guess a password. (The number of failed login attempts
is retained even if the power is turned off.)
1/3
To enable this setting, select the checkbox
touch the [OK] key.
The 5-minute operation lock state can be cleared in
the screen that appears when [User Control] >
[Default Settings] is selected in the Web page menu.
Disable Printing by Invalid User
Printing by users who do not enter valid user information
in the printer driver or who are not stored in the machine
1/3
for FTP push print or other direct print jobs can be
prohibited.
To enable this setting, select the checkbox
touch the [OK] key.
Default Network Authentication
Server Setting
Use this to set the default network authentication
destination.
When a user logs in from the Web page or sends a print
job to the machine using user information that is not
stored on the machine, the authentication destination is
not known.
This setting is used to specify one of the LDAP servers
stored on the machine as the authentication destination.
Highlight the key of the desired server and touch the
[OK] key. To cancel the selection, touch the [Cancel]
key.
89
and
and