Paper Type Registration - Sharp MX-2300N System Settings Manual

Paper Type Registration

Configure a "User type" when the name of the paper type does not appear in the selections or when you wish to select
the tray properties yourself. Up to 7 user types can be stored.
1
System Settings
Total Count
2
Paper Tray
Settings
Printer Condition
Settings
System Settings
Paper Tray Settings
Tray Settings
3
Paper Type Registration
Auto Tray Switching
System Settings
Paper Type Registration
Select the paper type to edit.
User Type 1
User Type 5
4
The user types have been stored by factory default with the names "User Type 1" to "User Type 7".
Paper Type Registration
No.01
Type Name User Type 1
Fixed Paper Side
Disable Staple
5
• To enable a property, select the checkbox
• The settings that can be selected vary depending on the peripheral devices installed.
SYSTEM
SETTINGS
Admin Password
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
User Type 2 User Type 3 User Type 4
User Type 6 User Type 7
Cancel
Disable Duplex
Disable Punch
(2) (1)
Press the [SYSTEM SETTINGS] key.
Touch the [Paper Tray Settings] key.
Exit
Touch the [Paper Type Registration] key.
OK
Touch the paper type that you wish to
Cancel
edit.
Configure the paper type properties.
Exit
(1) To change the type name, touch the [Type
Name] key and change the name.
Clear the pre-entered name, and then enter the desired
name (maximum of 14 characters).
(2) Touch the checkboxes as desired so that
(3)
they are
(3) Touch the [Exit] key.
.
29
or .