Disable Scan Function - Sharp MX-2300N System Settings Manual

Disabling of Auto Paper Selection
This setting is used to disable the Auto Paper
Selection function.
When this setting is enabled, automatic selection of
paper that is the same size as the original on the
document glass or in the automatic document feeder
does not take place.
To enable this setting, select the checkbox
touch the [OK] key.
Printer settings
Prohibit Notice Page Printing
This setting is used to disable printing of notice
pages.
To enable this setting, select the checkbox
touch the [OK] key.
Prohibit Test Page Printing
This setting is used to disable printing of test pages.
When this setting is enabled, "Printer Test Page" in
the system settings cannot be used to print test
pages.
To enable this setting, select the checkbox
touch the [OK] key.
Exclude Bypass-Tray from Auto Paper
Select
When paper selection is set to auto, this setting
excludes the bypass tray from the trays that can be
selected. It is recommended that you enable this
setting when special paper is frequently loaded in the
bypass tray.
To enable this setting, select the checkbox
touch the [OK] key.
Image Send Settings
Disable Switching of Display Order
This is used to prohibit changes to the order of display
(order search number, ascending, descending) in the
Address Book.
When this setting is enabled, touching a tab on the
Address Book screen does not change the order. The
currently selected display order will be the order that
is used after the setting is selected.
To enable this setting, select the checkbox
touch the [OK] key.

Disable Scan Function

This is used to disable PC scan and USB memory
scan.
When these modes are disabled, they are greyed out
when the mode is selected in the base screen.
Select the checkboxes
wish to disable and touch the [OK] key.
and
Settings to Disable the Registration of
Destination
This is used to prohibit the storing of destinations.
Storing from the machine, storing from the Web page,
and storing from a computer can each be separately
prohibited.
Disable Registering Destination from Operation
Panel
Disables address control from the machine.
and
To use this setting, select the desired items
touch the [OK] key.
• Group
• E-mail
• Internet Fax
• Fax
(When the [Select/Cancel All] key is touched, all
and
settings become
checked condition, all settings become
Disable Registering Destination on Web Page
(When network connection is enabled.)
Disable address control from the Web page.
To use this setting, select the checkboxes
desired items from the following and touch the [OK]
key.
• Group
• E-mail
and
• FTP
• Desktop
• Network folder
• Internet Fax
• Fax
(When the [Select/Cancel All] key is touched, all
settings become
checked condition, all settings become
Disable Registration Using Network Scanner
Tools
(When network connection is enabled.)
Disable address control from the Network Scanner
Tool.
To enable this setting, select the checkbox
and
touch the [OK] key.
121
of the modes that you
. When the key is touched in the
.)
. When the key is touched in the
.)
and
of the
and