B/W Quick Scan From Document Glass - Sharp MX-2300N System Settings Manual

B/W 600dpi x 600dpi Scanning
Mode for Document Feeder
(When an automatic document feeder is installed.)
The resolution for copying in black and white using the
automatic document feeder can be changed from
600 x 300 dpi to 600 x 600 dpi (high quality mode).
When high quality mode is used, fine print and thin lines
are reproduced with greater clarity, however, the
scanning speed is slower.
To enable this setting, select the checkbox
touch the [OK] key.
When high quality mode is not selected, the following
conditions must be satisfied in order to scan at
600 x 300 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the
ratio.
• [Copy of Copy] must not be enabled.
• Do not copy in black and white with the [COLOUR
START] key (
B/W Quick Scan from Document
Glass
The resolution for copying in black and white using the
document glass can be changed from 600 x 600 dpi to
600 x 300 dpi (high speed mode).
When high speed mode is selected, the first copy time is
quicker but the copy image is not as clear.
To enable this setting, select the checkbox
touch the [OK] key.
When high speed mode is selected, the following
conditions must be satisfied in order to scan at
600 x 300 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the
ratio.
• [Copy of Copy] must not be enabled.
• Do not copy in black and white with the [COLOUR
START] key (
and
).
and
).
100