Storing/Calling Of System Settings - Sharp MX-2300N System Settings Manual

Settings guide
Hide thumbs Also See for MX-2300N:
Table of Contents

Advertisement

Storing/Calling of System Settings

The current system settings can be stored, previously stored system settings can be called up, and the factory default
system settings can be restored. Touch the [Storing/Calling of system settings] key and configure the settings.
Restore Factory Defaults
This is used to return the system settings to the factory
default settings. If you wish to create a record of the
current settings before restoring the factory default
settings, print the current settings using
(Administrator)" (page 117) in the system settings
(administrator).
After executing this function, exit the system settings,
turn off the [POWER] key (
and then turn the [POWER] key (
make the factory default settings take effect.
Store Current Configuration
This is used to store the currently configured system
settings. The stored settings will be retained even if the
[POWER] key (
) is turned off. To call up the stored
settings, use
"Restore
Configuration" which is explained
below.
Items not stored
• Network Settings: These are not stored as unexpected
settings may cause damage to the
network.
• Product Keys: Product Keys are not stored as reissue
of keys may be necessary.
Restore Configuration
This is used to call up and restore settings that were
stored using
"Store Current
The current settings will change to the settings called up
from memory.
"List Print
), wait a brief interval,
) back on to
Configuration".
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents