Device Control - Sharp MX-2300N System Settings Manual

Device Control

These settings control devices installed on the machine. Touch the [Device Control] key and configure the settings.
Original Size Detector Setting
One of the five groups of standard original sizes shown
below can be selected for detection by the original size
detection function.
Select one of the keys and touch the [OK] key.
Selections Detectable original sizes
Document glass
AB-1 A3, A4, A4R, A5,
B4, B5, B5R
AB-2 A3, A4, A4R, A5,
B5, B5R
216 mm x 330 mm
(8-1/2" x 13")
AB-3 A4, A4R, A5, B4,
8K, 16K, 16KR
INCH-1 11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2"
INCH-2 11" x 17",
8-1/2" x 13"
(216 mm x 330 mm),
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2"
To disable detection of original sizes on the document
glass, select the [Cancel Detection at Document Glass]
checkbox and touch the [OK] key.
If "Cancel Detection at Document Glass" is selected,
all originals placed on the document glass will be
treated as special size originals.
Document feeder
tray (automatic
document feeder)
A3, A4, A4R, A5,
B4, B5, B5R,
8-1/2" x 11",
8-1/2" x 14",
11" x 17"
A3, A4, A4R,
A5, B4, B5, B5R,
8-1/2" x 11",
11" x 17",
216 mm x 330 mm
(8-1/2" x 13")
A3, A4, A4R, A5,
B4, 8K, 16K, 16KR,
8-1/2" x 11",
11" x 17",
216 mm x 330 mm
(8-1/2" x 13")
11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2", A4,
A3
11" x 17",
8-1/2" x 13"
(216 mm x 330 mm),
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2", A4,
A3
94
Disabling of Document Feeder
(When an automatic document feeder is installed.)
Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible
using the document glass.)
To enable this setting, select the checkbox
touch the [OK] key.
Original Feeding Mode
(When an automatic document feeder is installed.)
The following original feeding modes can be set to
operate by default in copy, Scan to HDD, and image
send modes. When a mode is frequently used, this
saves you from having to select the mode in the special
modes each time it is used.
• Mixed Size Original (Same Width/Different Width)
• Slow Scan Mode
System Settings
Original Feeding Mode
Mixed Size Doc.
Same Width
Copy
Scan to HDD
Image Send
To use this setting, select the checkboxes
desired items and touch the [OK] key.
Disabling of Duplex
This is used to disable two-sided printing, such as when
the duplex module malfunctions.
To enable this setting, select the checkbox
touch the [OK] key.
Disabling of Large Capacity
Cassette
(When a large capacity tray is installed.)
This setting is used to prohibit the use of the large capacity
tray, such as when the cassette malfunctions.
To enable this setting, select the checkbox
touch the [OK] key.
and
OK
Mixed Size Doc.
Slow Scan Mode
Different Width
of the
and
and