Device Count - Sharp MX-2300N System Settings Manual

Device Count

This is used to display or print the counts of the peripheral devices installed on the machine.
1
System Settings
Total Count
2
Paper Tray
Settings
Printer Condition
Settings
System Settings
Total Count
3
Job Count
System Settings
Device Count
Document Feeder
Duplex
Stapler
4
• Document feeder (when an automatic document feeder is installed)
Each sheet is counted as two pages when two-sided scanning is performed.
• Stapler (when a finisher or saddle stitch finisher is installed)
Two-position stapling and pamphlet stapling are counted as "2".
To cancel printing...
Touch the [Cancel] key in the message screen that appears after you touch the [Print] key.
SYSTEM
SETTINGS
Admin Password
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Device Count
Print
:19,496,400
: 6,256,123
: 511,923
Press the [SYSTEM SETTINGS] key.
Touch the [Total Count] key.
Exit
Touch the [Device Count] key.
OK
Check the device counts.
OK
To print the counts, touch the [Print] key. A message screen
appears and printing begins.
16