Energy Save - Sharp MX-2300N System Settings Manual

Energy Save

The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce
pollution and conserve natural resources. Touch the [Energy Save] key and configure the settings.
Toner Save in Printer Mode
(When the printer expansion kit is installed on
MX-2300G/2700G models.)
Toner Save mode can be enabled to reduce toner
consumption when printing. This setting is only effective for
printing that does not use the printer driver. When the printer
driver is used, the printer driver setting takes precedence.
To enable this setting, select the checkbox
touch the [OK] key.
Print data
This setting may not operate in some applications and
operating systems.
Toner Save in Copy Mode
This setting is used to save toner in copy mode. This setting
functions the same way as toner save in printer mode.
This function is not available in some countries and
regions.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off. To
disable Auto Power Shut-Off, touch the checkbox so that
a checkmark does not appear
key. Remove the checkmark if you prefer that Auto
Power Shut-Off does not operate.
When the set duration of time elapses after printing ends,
Auto Power Shut-Off activates and causes to machine to
go on standby at a minimal level of power consumption.
This function reduces your power costs, and at the same
time helps conserve natural resources and reduce pollution.
If you prefer that auto power shut-off activates as little as
possible, it is recommended that you try lengthening the
time setting after which activation takes place rather than
disabling the function altogether. (The time setting for
activation of Auto Power Shut-Off is selected using the
following "Auto Power Shut-Off
and
Example of
printing in
toner save
mode
and touch the [OK]
Timer" setting.)
Auto Power Shut-Off Timer
The time until Auto Power Shut-Off activates can be set
to any number of minutes from 1 to 240.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the
Select the time that best suits your workplace needs.
The timer setting will not be effective if Auto Power
Shut-Off is disabled using the
setting.
Preheat Mode Setting
The time until Preheat Mode activates can be set to any
number of minutes from 1 to 240.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the
Preheat Mode will activate when the duration of time
specified with this setting elapses after printing ends and
no further operations are performed. This function
reduces your power costs, and at the same time helps
conserve natural resources and reduce pollution.
Select the time that best suits your workplace needs.
Preheat mode cannot be disabled.
90
keys and touch the
or key.)
"Auto Power
keys and touch the
key.)
or
Shut-Off"