Setting The Ip Address From The Front Panel; Front Panel - Operator Display And Control Buttons; Control Buttons - IBM 2109 - SAN Fibre Channel Switch Model S16 Service Manual

|
|
|
|
|
|
|

Setting the IP address from the front panel

Figure 15. Front panel - operator display and control buttons
28
IBM SAN Fibre Channel Switch: 2109 Model S16 Installation and Service Guide
9. Fibre-channel IP Address [If none]: press Enter.
10. Fibre-channel Subnetmask [If none]: press Enter.
11. Gateway address [The current or new Gateway address or "None"]:
Note: Enter the Gateway address the customer has provided; or, if none is
required, press Enter.
12. Ipaddress:admin>logout
The logout command ends the Telnet session.
You have completed the installation of the 2109 Model S16 Switch. To do a quick
check of the fibre-channel ports on the switch before returning the machine to the
customer, see "Switch installation verification" on page 31.
See Figure 15 for the location and function of each button on the front panel of the
2109 Model S16 Switch.
Display

Control buttons

Table 15 lists the primary control button functions. The function of the button
changes depending on the menu level. Buttons either control navigating through the
menus or increment or decrement numeric values.
Table 15. Control buttons
Control Description
button
Down The Down button scrolls down the command list, or, if the user is changing a
numeric display, it decrements the displayed value.
Up The Up button scrolls up the command list, or, if the user is changing a
numeric display, it increments the displayed value.
Tab/Esc The Tab/Esc buttons tab through multiple options. When displaying a menu
item, pressing the Tab/Esc button reverses through previous commands and,
if pressed repeatedly, turns off the front panel display.
Up button
Tab/Esc button
Fiber Channel Switch 2109 S16
Down button
Enter button
RJ-45 10BASE-T
connection
SJ000055