Table of Contents
Advertisement
To reset a CO cable, complete the following steps:
1.
Log into the Web interface as a user with Appliance Administrator rights.
2.
Click the Configure tab, and then click Versions > CO in the left menu.
3.
Click the eID of the KCO cable you want to reset. The CO Version window opens.
4.
Click the Reset CO button. A confirmation window appears.
5.
Click OK to continue.
6.
When the reset completes, click the X in the upper right of the CO Version window to return to
the CO Versions window.
Using the Tools
When the Tools tab is selected, Admin and other users with Appliance Administrator rights can
click any of the buttons on the Tools window to do the specified tasks.
Figure 3.19: Tools tab
Rebooting the appliance using the Tools
When the Tools tab is selected, Admin and other users with Appliance Administrator rights can
reboot the appliance by clicking the Reboot Appliance button in the Tools tab. Appliance
Administrators can also reboot the appliance by clicking the Reboot Required button whenever it
appears after a configuration change. When Reboot Appliances is clicked, a disconnect message is
broadcast to any active users, the current user is logged out and the appliance is immediately
rebooted.
Chapter 3: Using the Web Interface
51
Hide quick links:
Advertisement
Table of Contents
