Viewing Co Cable Information And Setting A Co Language; Table 3.3: Co Cable Status Symbols - IBM 1735-2GX Installation And User Manual

46 GCM2 and GCM4 Installation and User's Guide
To modify the name of a target device, complete the following steps:
1. Log into the Web interface as a user with Appliance Administrator rights.
2. Click the Configure tab and then click Servers in the left menu.
3. Click the name of the server. The Modify Server Name window appears.
4. Type the name for the server. Names must have between 1 and 15 characters, can include
alphabetical and numeric characters, and can not include spaces or special characters with the
exception of hyphens.
5. Click Save.

Viewing CO cable information and setting a CO language

When the Configure tab is selected, the Admin and other users with Appliance Administrator or
User Administration rights can click the Servers > COs option in the left menu to view information
about each CO cable in the system, its Electronic ID number (EID), its Path (port), its CO cable
type and the type of target device to which it is connected.
Users with Appliance Administrator rights can also clear offline COs from the list and set the
language that is recorded in USB CO cables and on the target device to match the language of the
local keyboard.
NOTE:It is not possible to clear offline COs that are connected to a tiered analog appliance.
NOTE:All offline COs connected to GCM2 and GCM4 appliances are cleared, including those
associated with any powered down Servers.
NOTE:User device access rights are changed to remove target devices associated with cleared
offline COs.

Table 3.3: CO cable status symbols

Symbol Description
The CO cable is online (green circle).
The CO cable is offline or is not operating correctly.
The CO cable is being upgraded (yellow circle).