IBM 1735-2GX Installation And User Manual page 43

4. Select each appliance to be migrated and click > to move the appliance from the Available
Appliances list to the Appliances to migrate list.
5. To use the local database appliance information, select the Use Local Database Information
check box.
6. Click Next. The Completing the Migration Wizard window appears.
7. Click Finish to exit the Wizard.
To resync migrated appliances, complete the following steps:
1. In the VCS Explorer, right click the name of the appliance. The Resync button appears.
2. Click the Resync button. The Resync Appliance Wizard appears.
3. Click Next. A page with a warning and two check box options appears.
4. Read the warning, select the check box options as desired, and click Next. The Completing the
Resync Appliance Wizard appears.
5. Click Finish to exit.
To remove support for the Web interface on an appliance, remove the following steps:
1. In the Web interface, select the appliance.
2. Use the Firmware upgrade feature of the Web interface to install an earlier version of the
firmware that does not support the Web interface. See "Viewing software and firmware
versions for the appliance" on page 48.
3. In the VCS Explorer window, click Units, right click the name of the appliance, click Delete in
the pop-up menu, and click Yes to confirm.
4. In the VCS Explorer window, select Units > New Appliance. Follow the steps in the New
Appliance Wizard to add the appliance back again.
Chapter 3: Using the Web Interface 27