Required Adjustments To Mouse And Cursor Settings; Safety Precautions - IBM 1735-2GX Installation And User Manual

10 Global Console Manager Installation and User's Guide
Computers used to access the Web interface and client computers running the VCS must have one
of the following browsers installed:
• Internet Explorer 7.0 or later
• Netscape 7.0 or later
• Firefox 2.0 or later
Computers used to access the Web interface and client computers running the VCS must have Java
Runtime Environment JRE 5.0 update 11 installed. (The Video Viewer does not work without the
correct version of the JRE.)

Required adjustments to mouse and cursor settings

To ensure that the local mouse movement and remote cursor (pointer) display are in sync, the
mouse settings must be changed on each remote computer used for accessing the switching system
and on each target device.
In the mouse properties, ensure that cursor acceleration (sometimes called the pointer speed) is set
to Slow or None and that "snap to default" is not enabled.
Special cursors should not be used. Also make sure that cursor visibility options, such as pointer
trails, key cursor location animations, cursor shadowing and cursor hiding are turned off.
Ctrl
NOTE: To work around cursor synchronization problems, you can use the Tools - Single Cursor Mode command
available in the Viewer window to manually toggle control between the cursor on the target device being viewed
and the cursor on the computer from which you are accessing the switching system. The Viewer is described in
the VCS Installation and User's Guide.

Safety precautions

Observe the following guidelines to safely operate the equipment.