Configuring Users And User Access Rights; Figure 3.7: Users Window - IBM 1735-2GX Installation And User Manual

Configuring users and user access rights

When the Configure tab is selected, the Admin and other users with Appliance Administrator and
User Administrator rights can click on the Users option in the left menu to configure user accounts.

Figure 3.7: Users window

To configure users and user access rights, complete the following steps:
1. Log into the Web interface as a user with Appliance Administrator or User Administrator
rights.
2. Click the Configure tab.
3. In the left menu, click Users.
4. Click the Add User button. The Add/Modify User window appears.
5. Type the username and password to assign to the user and then verify the password by typing it
in the Verify Password field. The password must be between 5 and 16 characters and must
contain upper and lowercase alphabetical characters and at least one number.
Chapter 3: Using the Web Interface 39