Figure 4.20: Broadcast Window - IBM 1735-2GX Installation And User Manual

82 Global Console Manager Installation and User's Guide

Figure 4.20: Broadcast window

To broadcast to selected target devices, complete the following steps:
1. Complete one of the following steps:
• From the Broadcast window, select the Mouse or Keyboard check boxes for the target
devices that are to receive the broadcast commands.
• Press the Up or Down Arrow keys to move the cursor to the target device. Then press
Alt+K to select the Keyboard check box or Alt+M to select the Mouse check box. Repeat
for additional target devices.
2. Click OK to save the settings and return to the Setup window. Click X or press Escape to
return to the Main window.
3. Click Commands. The Commands window opens.
4. Select the Broadcast Enable check box to activate broadcasting. The Broadcast Enable
Confirm/Deny window opens.
5. Click OK to enable the broadcast. Click X or press Escape to cancel and return to the
Commands window.
6. If broadcasting is enabled, type the information or perform the mouse movements that you
want to broadcast from the user station. Only target devices in the list are accessible. The other
user is disabled when broadcast mode is enabled.
To turn broadcasting off, perform the following step:
From the OSCAR interface Commands window, clear the Broadcast Enable check box.