Required Tools; Package Contents; Environmental Requirements - IBM G8000 Installation Manual

Hide thumbs Also See for G8000:
Table of Contents

Advertisement

Required tools

You need the following tools or equipment to install the RackSwitch G8000:
v Standard flat-blade screwdriver
v #2 Phillips screwdriver
v Electrostatic discharge wrist strap

Package contents

The basic RackSwitch G8000 package contains the following items:
v G8000 switch unit (one of the following):
v One standard rack mount kit that includes:
v Mini-USB to RJ-45 serial cable, category 5 patch cable, RJ-45 to DB9 adapter
v Two AC power cords
v One IBM Documentation CD which includes the IBM System Networking
v One Warranty Information document
v One Important Notices document

Environmental requirements

This section describes the basic environmental requirements for the RackSwitch.
Make sure the location where you install the switch meets the following
requirements:
v Install the switch unit in a dry, clean, well-ventilated area.
v Provide adequate space in the front and back of the switch unit, to ensure proper
v Make sure that an adequate grounded power supply is within reach of the switch
v Make sure that twisted-pair cable is routed away from power lines, fluorescent
Product name
Model number
Serial number
Part number
Media access control
(MAC) address for switch
MAC addresses for other
components
– G8000 (front-to-rear) provides front-to-rear air flow
– G8000 (rear-to-front) provides rear-to-front airflow
– Two brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
RackSwitch G8000 Installation Guide (this document)
air flow.
unit.
lighting fixtures and other sources of electrical interference.
IBM System Networking RackSwitch G8000
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
Chapter 2. Installing the RackSwitch and options
17

Advertisement

Table of Contents
loading

Table of Contents