Security Configuration Option - IBM 1735-2GX Installation And User Manual

3. To enter the network speed, complete the following steps:
a. Type 1 and press Enter.
b. At the Enter selection prompt, enter the number of the speed setting and press Enter. Do
not select Auto-Negotiate. The Network Configuration menu appears.
4. To select either Static or DHCP IP addressing, complete the following steps:
a. Type 2 and press Enter to toggle between Static and DHCP addressing for the appliance.
•
•
5. To configure a static IP address complete the following steps:
b. Type 3 and press Enter.
c. Type an IP address at the Enter IP address prompt, and press Enter to return to the
Network Configuration Menu.
6. (Optional) To configure a netmask, complete the following steps:
a. Type 4 and press Enter.
b. Type a netmask at the Enter subnet mask prompt, and press Enter to return to the
Network Configuration Menu.
7. (Optional) To configure a default gateway, complete the following steps:
c. Type 5 and press Enter.
d. Type an IP address for the gateway at the Enter default gateway IP address prompt,
and press Enter to return to the Network Configuration Menu.
8. (Optional) To send a ping (ICMP request), type 7, enter the IP address of the host to ping, and
press Enter. When the reply is received, press any key to continue.
9. Type 0 (zero) and press Enter to apply changes and return to the Console Main menu.
10. Type 7 and press Enter to reboot the appliance and put the changes into effect.
11. When prompted, press any key to continue.

Security Configuration option

Selecting the Security Configuration option allows you to unbind the appliance from a DSView 3
software server. If authentication servers are configured, up to four authentication servers can be
listed along with their IP addresses. The menu also indicates whether the appliance is being
managed by a DSView 3 software server.
To configure security using the Console Menu, complete the following steps:
1. Access the Console Main menu.
2. Type 2 and press Enter for the Security Configuration option. The Security Configuration
menu opens.
Select static for ease of configuration.
If you choose DHCP, configure the DHCP target device to provide an IP address to
the appliance and then skip to step 7.
Chapter 5: Using the Console Menu 85