Memory; Video Memory; Specifications - HP LC2000r - NetServer - 128 MB RAM Handbook

Memory

Memory for the HP NetServer LF is installed on the processor board. The Intel 486 processor board has 8
MB of single-density base memory installed in bank 0. This memory is not customer removable and can
only be single-density. There are two banks (four sockets) available for expansion memory which can be
single or double density. The maximum memory supported is 136 MB (4 x 32 MB + 8 MB).
The Pentium processor board has 16 MB of removable base memory installed. There are two more banks
(four sockets) available for expansion. The maximum memory supported is 192 MB (6 x 32 MB).
The server supports 4 MB, 8 MB, 16 MB, and 32 MB (70 ns) SIMMs.
You must install SIMMs in pairs (called banks) of matching size; the banks, however, can be of
different sizes.
To achieve large memory configurations (greater than 144 MB) with the Pentium processor, you
must remove and replace the SIMMs that are already installed in the server.

Video Memory

No additional video memory can be installed in the HP NetServer LF. Current video memory is 512 KB.

Specifications

Power Supply
Power Availability
Power Consumption
System Dimensions
System Weight
Operating Temperature
Operating Humidity
62
Auto-ranging 90 to 132 VAC, or 198 to 264 VAC at 47-63Hz
386W continuous; 458W peak
551/529W maximum with 110/220V supply
654/627W peak with 110/220V supply
19.3 in. high x 13.7 in wide x 18.1 in deep
(49 cm high x 34.8 cm wide x 46 cm deep)
50-70 lbs depending on configuration (22.7-31.8 kg)
41 to 95 degrees F (5 to 35 degrees C)
20% to 80% non-condensing