Open the release latch and prepare the hard drive for installation.
2.
Install the hard drive.
3.
Determine the status of the hard drive from the hot-plug hard drive LEDs
4.
LED
combinations" on page 9).
Resume normal server operations.
5.
Memory option
The server blade ships with two DIMMs installed in the first memory bank for each installed processor.
Each processor has two banks, and each bank consists of two DIMM slots.
CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity.
DIMM guidelines
Observe the following DIMM installation guidelines:
("SAS and SATA hard drive
Hardware options installation 31