Specifications - HP LC2000r - NetServer - 128 MB RAM Handbook

In the EISA Configuration Utility, select the Hard Drive 1 (or 2) to be Drive Type 2 or 48 (User Definable) at
the end of the list of choices for any IDE hard disk drives installed. Do not use Hard Disk Auto Configuration.
Verify these parameters as the drive definition:
Parameter
Cylinders:
Heads:
Sectors:
Precomp:
Landing Zone:
Change the setting of "Posted I/O Writes" to Disabled. If the setting is Enabled, the drive operates very
slowly.

Specifications

Power Supply
Power Availability
Power Consumption
System Dimensions
System Weight
Operating Temperature
Operating Humidity
128
240 270 MB
MB
723 944
13 14
51 40
-1 -1
722 943
Power select switch: 90 to 132 VAC, or 198 to 264 VAC at 47-63Hz
386W continuous, 458W peak
551/529W maximum with 110/220V supply
654/627W peak with 110/220V supply
19.3 in. high x 13.7 in wide x 18.1 in deep
(49 cm high x 34.8 cm wide x 46 cm deep)
50-70 lbs (22.7-31.8 kg), depending on configuration
41 to 95 degrees F (5 to 35 degrees C)
20% to 80% non-condensing