HP LC2000r - NetServer - 128 MB RAM Handbook page 91

System Board Switch SW1
Switch
1 FLASH WRITE ENABLE: Enables or disables one of the two levels of flash
ROM write protection (the other level of protection is controlled by the HP
Update Utility).
ON: The BIOS can be updated by the HP Update Utility.
OFF: The BIOS is locked and cannot be updated.
2 BOOT BLOCK DISABLE: Reserved. Must be set to ON for system to
operate properly.
CONFIG VALID: Saves or erases the current configuration information in
3
NVRAM and CMOS.
ON: Saves the current configuration.
OFF: Erases the current system configuration.
CONFIG UNLOCK: Prevents or allows the current system configuration
4
maintained in NVRAM and CMOS to be changed.
ON: Unlocked. Allows the current system configuration to be changed.
OFF: Locked. Prevents the current system configuration from being
changed.
PASSWORD ENABLE: Enables or erases the power-on password
5
maintained in NVRAM.
ON: Power-on password functional.
OFF: Erases the current power-on password.
6 SMI# ENABLE: Not used; leave in the default position.
SW1 Default Settings:
Off On
Flash W rite Enable
1
Boot Lock Disable
2
Config Valid
3
4 Config Unlock
Password Enable
5
6
NMI LOG Enable
IO Control Enable
7
Video Enable
8
LH Plus / LH Pro
Off On
Flash Write Enable
1
Boot Lock Disable
2
Config Valid
3
Config Unlock
4
Password Enable
5
SMI # Enable
6
IO Control Enable
7
Video Enable
8
LH
Function Default
ON
ON
ON
ON
ON
OFF (LH)
ON (LH
Plus/Pro)
83