Installation; Table Processing Diagram - Brother RH-9820 Instruction Manual

3. INSTALLATION

Machine installation should only be carried out by a
qualified technician.
Contact your Brother dealer or a qualified electrician
for any electrical work that may need to be done.
The sewing machine weighs approximately 120 kg.
Installation of the sewing machine and adjustment of
the table height should be carried out by four or more
people.
Do not connect the power cord until installation is
complete. If this is not done, the sewing machine may
operate if the start switch is pressed by mistake, which
could result in serious injury.
Hold the machine head with both hands when tilting it
back or returning
In addition, do not subject the machine head to extra
force while it is tilted back. If this is not observed, the
machine head may lose balance and fall over
(together with the table), and injury or damage to the
sewing machine may result.

3-1. Table processing diagram

•
Use a table with legs which is strong enough to bear the weight of the sewing machine (120 kg) and which can also
withstand vibration. Use a table with a top thickness of 49 - 60 mm.
NOTE:
If the thickness of the table exceeds 60 mm, the accessory bolts and the cables coming from the machine head may not
be long enough.
•
If using casters, use ones which can bear the total weight of sewing machine and table.
•
Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together, it may
result in incorrect sewing machine operation.
•
The method of processing the table varies depending on whether the machine head is sitting on the table or embedded into
the table. Refer to the processing diagrams for each respective setting-up method and drill the holes as appropriate.
CAUTION
it to its original position.
All cords should be secured at least 25 mm away from
any moving parts. Furthermore, do not excessively
bend the cords or secure them too firmly with staples.
If this is not observed, there is the danger that fire or
electric shocks could occur.
Be sure to connect the ground.
If the ground connection is not secure, you run a high
risk of receiving a serious electric shock, and
problems with correct operation may also occur.
Install the safety covers to the machine head and
motor.
RH-9820
3. INSTALLATION
4