Changing The Production Counter Setting - Brother RH-9820 Instruction Manual

7. USING THE SEWING MACHINE (OPERATION PANEL: ADVENCED OPERATION)
Initialization level and settings that are reset or initialized.
Program settings
(Parameter)
Cycle programs
Memory switch
Program No.
Parameter No.
Production counter
Operating mode
Material setting position
Cutting operation

7-4. Changing the production counter setting

The production counter is displayed at the bottom-right of the screen during automatic mode. The counter value increases by
1 each time a pattern is sewn.
1
Switch the mode to automatic mode.
0430B
2
While the sewing machine is at standby, hold down the ENTER key and press the
0451B
3
Set the counting value (1).
0414B
4
Apply the changed setting.
0415B
NOTE:
If you press the AUTO key while the counting value (1) is flashing, the mode will return to automatic mode and the setting
will not be changed.
63
Level 1 Level 2
Default value -
Reset -
- Default value
- -
- -
- -
- -
- -
- -
Level 3
Default value
Reset
Default value
1
1
0
Program
Set back
OFF
* When the counting value is changed, (1) will flash in the
display.
* If you would like to return the setting to "0", press the
RESET key.
The mode will return to automatic mode.
RH-9820
Production counter
key.
(1)
0222B
0262B
0599B
0600B