3. INSTALLATION
3-9. Connecting the power cord
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric
shock, and problems with correct operation may also occur.
< Seen from underneath table >
14
Control box
Green and yellow wire (ground wire)
BAS-326H-484, BAS-326H-484 SF
CAUTION
Leg
3665B
Connect cords that match the voltage
specifications.
< EU specifications>
(1) Filter box
(2) Screws [4 pcs.]
(3) Staples [6 pcs.]
(4) Power cord
1. Attach an appropriate switch and cable
to the power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert
the
power
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(3) to make sure that they do not pierce
the cords.
• Do not use extension cords, otherwise
machine
operation
problems
result.
plug
into
a
may