Changing The Sewing Start Point Of The Sewing Data - Brother PS-300B Instruction Manual

3. To move the desired point:
Change the coordinates of the point you want to move. (Click the desired cell to
highlight the existing value, and then input a new value to replace it.)
4. To delete the desired code:
Click the cell that shows the code you want to delete to highlight the cell, and then press
the Delete button on the keyboard.
NOTE: You cannot add a code to a point.
5. Click the OK button.
The edited result is applied to the sewing data.

Changing the sewing start point of the sewing data:

You can change the sewing start point (the blue squa re connected with the start point of the
first design element ) of the sewing data.
20/164