3. In the Offset group box, specify the conditions for creating a copy.
Item
Maintain
Offset
4. Click the OK button when the setting in the Offset group box is completed.
The copy of the specified settings is automatically created.
NOTE: The original outlines are not deleted.
3-5-7. Making a copy of design elements at the specified position
You can make a copy of the desired design elements (outline, manual stitch, manual feed data)
at the specified position.
To make a copy of design elements (Modify-Copy To,
1. Select one or more design elements.
A selection frame of "dashes" appears around the design element(s).
2. Do one of the following:
On the Modify drop-down menu, click Copy To.
Click the Copy To icon
The Input Point dialog box appears.
Pitch:
Select this to maintain the pitch of the original. (The number of stitches will be
changed.)
Stitch Number:
Select this to maintain the number of stitches of the original. (Stitch pitch will be
changed.)
Select Left (In) to create a copy on the left of the creating direction, or Right
(Out) to create a copy on the right of the creating direction.
Input the desired offset value (mm) in the input box.
in the toolbar.
Explanation
143/164
):