Creating B434E Data - Brother PS-300B Instruction Manual

2-4. Creating B434E data

The following procedure describes how to create manual stitch data by tracing an imported
image and exporting it to a ROM.
2-4-1. Opening a new design area
When starting up PS-300B, an empty design area automatically opens. You can also open a
new design area at any time by doing one of the following.
Click New on the File drop-down menu, or the New icon
On the keyboard, while holding down the Ctrl key, press the N key.
2-4-2. Specifying a sewing machine model
Specify the sewing machine model that you are creating sewing data for, and then put its
sewing area frame into the design area after applying some attributes to it.
NOTE: We recommend you specify the machine model before creating a design, since the sewing area
differs with each model.
1. Do one of the following:
Click Machine Model Setting on the Tools drop-down menu (or the context menu
that appears when right-clicking), or the Machine Model Setting icon
toolbar.
On the keyboard, while holding down the Ctrl key, press the M key.
The Machine Model Setting dialog box appears.
2. Select B434E from the Machine Model Name drop-down list.
49/164
in the toolbar.
in the