To Select Two Or More Design Elements - Brother PS-300B Instruction Manual

4 Image
NOTE: When selecting two or more outlines, the one whose sewing order is earlier is given high
priority.
The design elements not displayed by the setting in Show/Hide on the View drop-down menu
will not be selected.
To select a design element:
1. Do one of the following:
On the Shape drop-down menu, click Select.
Click the Select icon
2. Click the design element.
A selection frame of "dashes" appears around the design element to show that it is selected.

To select two or more design elements:

1. Do one of the following:
On the Shape drop-down menu, click Select.
Click the Select icon
2. Do one of the following:
A selection frame of "dashes" appears around the elements to show that they are selected.
Hold down the keyboard's Shift or Ctrl key while clicking design elements one by
one.
Dragging the pointer over the design elements from upper left to lower right (shown
below) selects only the design elements enclosed by the selection frame.
in the toolbar.
in the toolbar.
104/164