Converting Two Design Elements Into One; Reversing The Sewing Direction Of Design Elements; Aligning End Point Of First Element To Start Point Of Second Element - Brother PS-300B Instruction Manual

2-4-7. Converting two design elements into one

The following procedure explains how to connect the current data (two design elements) and
convert them into one.

Reversing the sewing direction of design elements:

The current link of the two design elements (the original and its copy) is not proper for sewing.
By reversing the start and end points of the second element, it can be improved.
1. Use the Select
2. Click Swap Start/End Point on the Modify drop-down menu (or the context menu that
appears when right-clicking), or the Swap Start/End Point icon
The start and end points of the selected design element are switched.
Aligning the end point of the first element to the start point of the second
element:
1. Use the Select
2. Click Pivot on the Modify drop-down menu, or the Pivot icon
The stitch points of both design elements are shown, and the shape of the pointer changes to
tool to select the second design element.
tool to select the second design element.
56/164
in the toolbar.
in the toolbar.