To Straighten A Smooth Punch Point - Brother PS-300B Instruction Manual

To straighten a smooth punch point (Modify-Point-Cusp,
The Cusp command allows you to straighten a smooth punch point between two rounded paths
of an outline.
1. Using the Select Punch Point tool
straighten.
The selected punch point changes to a black circle.
NOTE: The Cusp command is available only when a smooth punch point of an outline is selected.
2. Do one of the following:
On the Modify drop-down menu, click Point. On the Point sub- menu, click Cusp.
Click the Cusp icon
Right-click to display the context menu, and then click Cusp.
The two rounded paths of outlines that meet at the smooth point are straightened out.
, select the smooth punch point that you want to
in the toolbar.
134/164
):