Table of Contents
Advertisement
NOTE: Click the Default button if you want to restore the default settings.
Click the Close button if you want to close this dialog box without applying the setting
changes you made.
NOTE: You can also change the Stitch Type and Pitch from the toolbar directly.
Descr iptions of the items in the Property dialog box
Attribute tab
Click the Attribute tab to make basic settings in the Attribute group box. If you select
Running for the Stitch Type , you can then make setting changes in the Running group box.
If you select Border, you can make setting changes in the Border group box.
Color:
Select the color for the outline data from the drop-down list.
Connection:
When a design element is created or edited, or its attributes are changed, the connection
between the element and the adjacent element may not be appropriate. You can specify how to
connect them using either feed or stitch.
Select FEED on the drop-down list to connect design elements using feed or select STITCH
to connect design elements using stitch.
NOTE: When you select STITCH on the drop-down list:
When the interval between the design elements is more than the Max. Length set in the
Option Setting
Stitch Type:
Select the stitch type you use before drawing an outline.
Stitch Type
Running
Border
NOTE: The stitch type can also be selected with the Stitch Type drop-down list in the toolbar.
Tack Method:
You can set the securing stitching method at the start and end points of an element.
Select the desired securing stitching method from each drop-down list, and specify the number
of stitches both for the start and end points.
Tack Method
None
dialog box, design elements will be connected using feed.
Creates stitch data whose outline is sewn with running stitching.
Creates stitch data required to stitch the outline with zigzag stitching of the
specified width.
No setting for securing stitching.
Explanation
Explanation
119/164
Hide quick links:
Advertisement
Table of Contents
