To Make A Symmetrical Copy Of Design Elements - Brother PS-300B Instruction Manual

3. Do any of the following:
Check the Relative Coordinate check box to position the copy using the original
position as the base of relative coordinates.
Clear the Relative Coordinate check box to position the copy using absolute
coordinates. (Base point: X=0, Y=0)
Input values in the X and Y input boxes to specify the position of the copy.
4. Click the OK button.
The selected design elements are copied and positioned at the specified position.
NOTE: Refer to How to use the Input Point dialog box
To make a symmetrical copy of design elements (Modify-Mirror Copy,
You can duplicate the desired design elements symmetrically by specifying a reference line
(mirror axis).
1. Select one or more design elements.
A selection frame of "dashes" appears around the design element(s).
2. Do one of the following:
On the Modify drop-down menu, click Mirror Copy.
Click the Mirror Copy icon
3. Do one of the following:
Draw a mirror axis in the design area by clicking the desired two points.
Follow the next steps (a) to (d) to draw a mirror axis by inputting values in the Input
Point dialog box.
(a) Press any of the numeric keys on the keyboard to display the Input Point dialog
box.
if necessary.
in the toolbar.
144/164
):