Brother PS-300B Instruction Manual page 101

2. When a sewing area of a specified machine model is not set in the design area:
While holding down the keyboard's Ctrl or Shift key, click the left mouse button.
The center of the pattern aligns with the origin (0) of the design area's coordinates.
* For details on setting the sewing area of a specified machine, refer to
Specifying a sewing machine model and set its sewing
3. Click a numeric key on the keyboard to display the Input Point dialog box. Then
you can input the absolute coordinates of the pattern's center point, then click the OK
button. The center of the pattern will be placed at the specified point.
4. While holding down the keyboard's Ctrl and Shift key, click the left mouse button.
The center of the pattern aligns with the center of the design element(s) in the design
area.
3-2-6. Adding codes (Shape-Code,
The Code Setting dialog box allows you to easily add any of the various sewing machine
codes for operations such as changing the sewing speed, pausing or cutting the thread.
NOTE: Codes can only be added to stitches and feeds. To add codes to an outline for which stitches
have not yet been generated, first generate stitches by selecting the outline, and then click
Generate Select
1. Using the Select Point tool
to add a code.
The selected point turns black.
2. Do one of the following:
On the Shape drop-down menu, click Code .
Click the Code icon
Right-click, and on the context menu that appears, click Code .
The Code Setting dialog box appears. (Refer to the table below for the function of each code.)
on the Stitch drop-down menu.
, select the point in the stitch or feed data where you want
in the toolbar.
)
101/164
"3-7-5.
area".