Brother PS-300B Instruction Manual page 88

OK
Cancel
Preview
Confirm
NOTE: The right side in horizontal direction is positive, the left negative; the upper part in the
vertical direction is positive, the lower negative.
As for angles, the horizontal line (the X axis) indicates 0
direction are 0 to 360
4. When you have completed the box, click the OK button.
5. Repeat steps 1 to 4 to draw more outlines.
The end point of the previous outline and the start point of the current outline are connected with
a feed or a stitch that is specified in Property on the View drop-down menu.
Example of inputting values
Example 1
To specify a point at the position where it is moved 50 mm to the right in the X
direction and 30 mm up in the Y direction, input "50" in the X cell and "30" in the Y
cell.
Example 2
To specify a point at the position -30.5° and 60 mm, input "-30.5" in the Angle cell
path.
NOTE: Refer to "Example of inputting
The keyboard's Tab key and arrow keys can be used to
determine the inputted value and move to the next cell.
Click this button to create an outline with the settings you
have made, and close this dialog box.
Click this button to cancel the settings you made in this dialog
box, and close this dialog box.
NOTE: However, you cannot cancel the settings which have
been confirmed by clicking the Confirm button.
Click this button to preview the outline created with the
settings you have made.
Click this button to create an outline with the settings you
have made. Continue inputting values to create more outlines.
, and angles in the counterclockwise direction are 0 to -360
°
88/164
values" below.
, angles in the clockwise
°
.
°