Brother PS-300B Instruction Manual page 136

3. In the Maintain group box, select whether to keep the number of stitches (Stitch
Number) or the pitch (Pitch) of the original data.
Item
Stitch Number
Pitch
NOTE: If you resize a shape of manual stitch or manual feed, the stitch number will not change
even when you select Pitch.
4. In the Resize by group box, select whether to resize the design eleme nts to a specific
dimension (Size ) or to a percentage of the original size (Percentage).
5 Do one of the following:
If Size is selected, type the desired width in the Width input box and the desired
height in the Height input box. To maintain the design elements' current height-to-
width proportion, check the Maintain Aspect Ratio check box.
If Percentage is selected, select Whole or Width/Height, then select the desired
percentage.
Item
Whole
Width
Height
Select this to keep the number of stitches. (The pitch will be changed.)
Select this to keep the pitch. (Stitch generation will be done again.)
Select this to resize both the width and height of the design elements, and
select the desired percentage from the drop-down list, or input the desired
percentage directly.
Select this to resize the width and height of the design elements separately,
and select the desired percentage for each from the drop-down lists, or input
the desired percentage directly.
Explanation
Explanation
136/164