Specifying Various Default Settings; To Change Default Settings; To Change The Space Of The Gridlines - Brother PS-300B Instruction Manual

To change the space of the gridlines:

To change the horizontal interval of the gridlines, type the desired width (in
millimeters or inches) in the Horizontal Spacing input box. (Setting range: 0.5 to 50
mm, default: 10 mm)
To change the vertical interval of the gridlines, type the desired width (in millimeters
or inches) in the Vertical Spacing input box. (Setting range: 0.5 to 50 mm, default:
10 mm)
To maintain the same horizontal and vertical distances in the gridlines, check the
Maintain Aspect Ratio check box.
3. Click the OK button to apply the settings you made and close this dialog box.
NOTE: Click the Cance l button to cancel the settings you made and close this dialog box.
Click the Default button to revert all the settings to the software defaults.
3-7-4. Specifying various default settings of PS-300B
You can specify various default settings of PS-300B, for example the maximum and minimum
stitch lengths.
To change default settings (Tools-Option Setting,
1. Do one of the following:
On the Tools drop-down menu, click Option Setting.
Click the Option button in the toolbar.
155/164
, Ctrl+T):